Conveyor chain

A conveyor chain is chain that has been designed specifically for chain conveyor systems. It contains a number of journal bearings that are held together by constraining hyperlink plates. Each bearing contains a pin and a bush which the chain roller revolves.
1. Hollow bearing pin chain
Hollow bearing pin chain allows attachments to be bolted through the hollow bearing pins. Attachments may be tightly set or in a ‘free’ manner.
2. Solid bearing pin chain
Solid bearing pin chain gets the same dimensions as hollow bearing pin chain but is definitely more robust and thus suitable for more arduous conveyor applications.
3. Deep link chain
Deep link chain has deeper part plates than the normal chain plates and so provides a continuous carrying edge above the roller periphery. Deep hyperlink chain comes in solid and hollow bearing pin types.
4. Drop forged chain
Drop forged chain (also referred to as en-masse conveyor chain or scraper chain) has already been fitted with attachments that have been welded directly onto the chain links
Conveyor series roller chains are probably the most widely used types of chains in the world. Because of this, we stock almost every size and configuration ranging from ANSI, DIN, and ISO accredited series chains. We likewise have a full type of stainless steel conveyor chains and also hollow-pin conveyor roller chains.
The most common design of conveyor chain is called dual pitch roller chain. This is because it conforms to ANSI B29.1 specifications and may retrofit most applications. It also offers a low weight to high-power ratio, an extended service life generally in most applications, and has an array of attachments available. There are two common styles of this chain. The first is the one shown in the picture above on the still left, the second reason is the picture above on the right. The photo on the proper is oversized-roller dual pitch conveyor chain. This can be used because the rollers extend past the side plates creating a simple way to convey content in one location to another. These chains are typically designated with a 2 in place of the next 0 in the part numbers for these chains. Example, C2050 chain may be the standard series and C2052 chain has the oversized rollers.
Note: Most double pitch conveyor roller chains are stock in 10ft boxes, 50ft reels, and 100ft reels. Particular cut to size strands and attachments are availble upon request.


Another most common style of conveyor roller chain is called the straight side plate or sidebar roller chain. This series fully match ANSI and ISO metric dimensionally apart from having straight aspect plates. Having straight part plates makes this roller chain have the ability to carry the product on top of it evenly.
· 1
Conveyor chain are designed for various goods and mechanism in many fields.
· 2
We are providing an array of Conveyor chain in proportions and feature.
· 3
We are offering best suitable Conveyor chain for your environment of usage
Small Conveyor Chain
Attachment Roller Chain is regular roller chain with attachment assembled.
Attachment Stainless Roller Chain

Attachment Stainless Roller Chain is Stainless Roller Chain with attachment assembled since needed.
Dual Pitch Roller Chain

Dual Pitch Roller Chain is certainly divided into the large roller series and the tiny roller series, based on the external diameter of the rollers used.
Attachment Dual Pitch Roller Chain

Attachment Double Pitch Roller Chain is Dual Pitch Roller Chain with attachment assembled.
Double Pitch Stainless Steel Roller Chain

Dual Pitch Stainless Roller Chain could work well under challenging atmosphere and circumstance which requirements high corrosion and heat resistance.
Attachment Double Pitch Stainless Roller Chain

Attachment Double Pitch Roller Chain offers oval type link plate.
Hollow Pin Chain

Hollow Pin Chain has hollow pin which allows various kind of pins or attachment fit into.
Best Roller Chain

Top Roller Chain may carry goods at the top roller allowing stopping or holding goods while chain keeps running.
Part Roller Chain

Side Roller Chain has two types of Roller assembly, one is mating and another is staggered. In any case plastic roller might help reducing noise.
Waste Oven Conveyor Chain

As being is used under serious condition, such as ash and water, Waste Oven Conveyor Chain is provided unique style for higher wear resistance.
Case Conveyor Chain

Case conveyor runs the chain inside a casing to mention loads. It can run vertically or on an incline, in addition to horizontally.
§ Material:
§ Configuration:
§ Other characteristics:
• Wide variety of products
• Sizes according to ISO 1275
• Versions with small rollers and transport rollers available
• All ELITE chain plates 1 are manufactured using processes
such as fine blanking and ball-drifting, so an especially high

Product range:
• Double pitch roller chains ISO 1275
• Double pitch roller chains with straight plates ISO 1275
• Dual pitch hollow pin bushed chains
• Dual pitch hollow pin roller chains contact ratio is guaranteed.
• Solid, case hardened rollers 2 with good put on resistance
• ELITE pins 3 are smooth and also have an extra hard surface area for increased wear resistance
Model article number:

iwis Leaf chains (in accordance to works regular) are produced from accuracy chain parts in accordance to ISO 606. They may be customized and so are compliant with the EC Machinery Directive 2006/42/EC.

– iwis link plates with very high tensile strengths
– Pins with extra hardened surface area for high wear resistance
– Precision-formed, heat-treated and shot-peened hyperlink plates with optimised geometry
– Higher breaking forces achieved by optimised plate thickness
– Improved press-fitting of pins and external plates for higher exhaustion strength
– Link plates with a particularly high contact ratio
– Pins with hardened areas for increased wear resistance
– Special versions produced to works standards available
Model article number: –

Using Ever-power belt signing up for strand during set up will significantly extend your belt lifestyle! Belt installations that are rushed and improperly made are often the cause of belt breakage and downtime. Ever-power is definitely a pre-formed, pre-bent joining strand that requires no bending or weaving during installation. This helps to avoid any weak areas in the belt joint.