Greenhouse geared motor

The EP Greenhouse geared motor is a concise and lightweight reduction gear motor with an integrated limit switch system that’s suitable for assembly of a locally available electric engine. The reducer is utilized in manually-managed or climate-managed ventilation and screen systems in greenhouses. The quick and easy-to-install EP gear reducer can be rainproof and windproof. The reducer includes a high protection course (IP65) and can be used within an ambient temperature of 0-60 °C.

The low-noise geared motor for Greenhouse includes a gearwheel transmission and a worm wheel transmission, which are integrated within an aluminum precision housing. The self-braking worm wheel transmitting means that the drive shaft is locked when the reduction gearbox is not running. The fully sealed reduction geared motor comes with an expansion chamber with a diaphragm to keep carefully the gear essential oil at a minimal pressure under all circumstances, even at high temperatures. Thanks to the use of an expansion chamber, the reducer could be installed in any placement. There are no limitations, because there is no need for a bleed connect. The sealed reduction gear motor keeps the gear essential oil of the reducer in optimal condition for its entire operating lifetime. The gear driver is suitable for discontinuous use, working course s3-30%, with a maximum activation time of 25 minutes.

The Gear box reduction geared motor has an FT85 motor assembly flange, on to which a suitable IEC standard motor can simply be installed (EN 50347).

The Gear box has a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off at the end positions. The limit switch system is installed within an built-in chamber and is certainly enclosed by an impact-resistant plastic material cover. The limit change system is obtainable and simple to adjust. The limit change system’s maximum switching range is definitely 40 or 64 revolutions of the drive shaft. The cabling is linked in spring-clip connections. The reducer comes with an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.

The gear motor for greenhouse comes with 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates can be found as accessories.

Optimum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in case of app of 4-pole electric motor.
Protection class IP65.
May be used in ambient temperatures of 0-60°C.
Ideal for discontinuous use, operating class s3-30%, maximum activation time 25 mins.
Equipped as regular with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installing IEC regular motor (EN 50347).
Maximum switching range of limit switch system 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).