PIN coupling

What is pin bush coupling?
Industrial Pin Bush Coupling
The function of a flexible coupling is to transmit torque from on shaft to some other where limited mis alignment might occur and also to absorb shock loads.
We are one of the prominent agencies engaged in providing Pinbush Coupling which has highly developed rubber substances for use in bushes to absorb shock, tensional vibrations and minor misalignments. These couplings happen to be flexible in type and are generally of the cushioned drive type that is utilized for transmitting the torque through the best possible tensile metal bolts to the device input. Moreover, these are simple and small in construction which makes these capable of transmitting great torques at optimum speeds. These kinds of couplings generally permit travel in either direction and require neither lubrication, nor adjustment after fitting.

Pin and Bush Couplings
lubrication-free
Features
Vertical/horizontal mounting
Adsorbs vibrations
Progressive torsion spring properties due to primarily pressurised bushings
Fail-safe in case of the inability of the bushings
Convenient replacement of bushings without disassembly of the coupling halves
Free of maintenance, no lubrication necessary
Declaration of conformity relative to ATEX 2014/34/EU possible
Typical applications
Pump drives
Belt drives
Ventilators
General mechanical engineering

Ever-ability pin and bush coupling
Ever-power couplings consist of a set of resilient BARREL Shaped bushes with pins & nuts and two flanged hubs of graded cast iron.
The special BARREL shaped bushes permit the MISALIGNMENT IN ALL DIRECTIONS and present extra torsional flexibility in comparison with plain bushes.
These couplings are suited to basic engineering application requiring reliable power transmission even under conditions of shaft misalignments which are often unavoidable.

Description
Ever-power couplings are used as flexible compensating couplings in all applications requiring a trusted transmitting of torque under harsh operating conditions. The conical chairs of the buffer pins facilitate installation and guarantee maintenance-free operation. The optimized condition of the barrelled buffers enables simple plug-in assembly and low circumferential backlash. Various type variants are offered, electronic. g. with brake disk, axial play limiting machine, or brake engine couplings.
To the most notable of the page
Examples of application
Ever-power couplings are used in general mechanical engineering both since high-rate couplings and for great torques, e. g. in
Cranes
Conveyors
Blowers
Screw pumps
Cableways
Mixers
Cement processing machines7
To the top of the page
Benefits of the product
Flexible fail-secure pin and bush coupling for moderate up to high torques
Compact style; low weights and mass moments of inertia
Independent of path of rotation (ideal for reversing operation)
Suitable for plug-in assembly (blind assembly, bell housing installation)
Torque selection of the standard series between 200 Nm and 1,300,000 Nm
Can be used in potentially explosive atmospheres; certified acc. to 94/9/EC (ATEX 95)

Pin & Bush Couplings
Simple and almost indestructible, the pin and bush style is perfect for applications that involve basic safety, such as for example elevator drives or perhaps fire pumps. The fail-safe facet of the design allows the coupling to become serviced at easy intervals, should the elastomer become damaged.
The elastomer elements decrease vibration and dampen impact loads, as well as accommodate misalignment up to 0.5 degrees. The original bushing is usually a neoprene elastomer with a graphite impregnated bronze sleeve. They are still available, as well as a contemporary version of this concept: urethane bushings.

Ever-electric power also manufactures many custom variations of the coupling including brake drum and shear pin type couplings.
Damping shaft coupling that can be utilized universally to pay for shaft misalignment
Nominal torque range from TKN = 19 Nm up to 62,000 Nm with 23 sizes
Temperature range: from -50 °C to +100 °C

Robust and proven a million times
Because of their torsional versatility, Ever-power couplings can maneuver critical torsional vibrations from the operating region of mechanical equipment in such a way that no unwanted effects on the travel train are to be expected. Ever-electricity couplings are made of high-quality cast iron. The versatile elements manufactured from synthetic rubber (Buna-N) can be found in different examples of hardness for most applications. Metallic pins and flexible factors are designed so that no don occurs when they are properly fitted.

Your benefits instantly
Fail-safe for maximum operational reliability
Three-part type well suited for plug-in assembly and simplified substitute of elements
Selection of elastomer hardness to match various applications
Ideal for use in potentially explosive environments; certified according to
2014/34/EU (ATEX)
High degree of option of parts ex stock

Established as an professional standard, worldwide in use
Mining and Cement: heating system technology
Coal and oil: pumps, fans, compressors, weather condensers
Power Generation: pumps, lovers, compressors, air condensers, normal water turbines
Chemical substances and Pharmaceuticals: driers, lauter tuns, pumps, enthusiasts, compressors, mixers, agitators, reactors
Plastic and Rubber: solo- and double-screw extruders
Pulp and Paper: wastewater purification plants
Water and Wastewater: aerators
Foodstuff and Beverage: lauter tuns, reactors, agitators, mixers

Did you know?
Original Ever-power elastomers ensure the perfect operation of one’s body. The flexible elements of the Ever-electrical power coupling are subject to compression. If the versatile elements are irreparably ruined, the hub parts touch metal. This “emergency procedure capability” is necessary, e.g., in the case of fire pump drives.