Automatic Carsh Lock Bottom 4 6 Corner Box Pasting Machine

Automatic Carsh Lock Bottom 4 6 Corner Box Pasting Machine

1450-Straight line- double side-lock-base-4-6corner operate
       Folding Gluing Machine      

1.Driving by synchronous belt,make sure smooth and accurate running.
2.Inverter driving,secure and energy conserving.
3.Use electrical change,effortless run.
four.JCPTmatic continuous feeding,use numerous belt with vibrating motor,(for higher configuration use drilled suction belt),to keep the feeding secure.
5.JCPTmatic counting and kicking,quantity can preset.
6.Conveyer strain adjustable according to the box to guarantee greatest high quality.
2. Major complex parameter:

Product ZH-M1450 4/six
Suitable substance AB/BE/A/B/C/E/F flute  , Card board210-850gsm
Max approach JCPTmatic continuous feeding
Max mechanical pace 300m/min
General dimension 19700*2300*1650mm
Weight 13.5T
Energy intake 27.2KW,380V,50HZ
Compressed air 6 bar,10 m³/h,60 L

 Equipment configuration

Major motor GPG
PLC Siemens
Inverter Siemens
Touch monitor Siemens
Driving JCPT  NSK
Simple belt NITTA Japan
Reduced voltage equipment Schneider( Relays, contactor,breaker,Button)
Photo Change Panasonic
Wall thickness 20m (right side,remaining facet) tempered
Gluing method KQ CHINA
Servo motor Delta (ZheJiang ) for back again fold
Servo motor VEICHI China (manage the folding section belt)an additional business without having it


1.Feeder Segment
·Friction feeder. Independently driven by inverter.
  Adjustable electronic pile vibrator.
·Lateral feed gates completely adjustable to the width of the blank.

2.Paper Alignment System:  
Independent part that registers the blank to 1 side making sure a ideal parallelism ahead of entering the pre-folding or gluing sections.
  Independently driven by motor.
  Possibility to register on any side of the equipment.
  Fast and easy set up.Configuration reducer, distinct containers when the conversion, the reducer with electric powered regulation

3.Pre-fold Section:

  The pre-fold part has the benefit to make the box a lot more simple and easy to open up,even in some case the scoring is not extremely well.
  Left hand glue flap pre-folder up to 180º.
  3rd crease pre-folding established up to 135º.
  1st and 3rd crease openers.
  Configuration reducer, various packing containers when the conversion, the reducer with electric powered regulation

four.Base Lock Segment
  Lock-bottom assembly mechanism with higher elastic hookers is of deal layout,fast and straightforward operation.
·Independently pushed by motor.
  Complete established of folding hooks and helixes for smooth and correct folding of entrance flaps
  Adjustable hook stress.
  Fast and effortless setup
  Configuration reducer, distinct bins when the conversion, the reducer with electric regulation.

5.Down Gluing section
·Two reduce (still left and appropriate) gluing tanks.
·Easy to get rid of and clean.

six.Folding Section
  Independently pushed by motor.
  JCPT and precise folding of 2nd and 4th creases.
  Outer folding belts adjustable up to 180º with variable velocity controlled by inverter
  Easy accessibility.
  Configure the servo motor to modify the belt velocity,Make the box a lot more neat

7.Trombone  Section
·Independently pushed by motor.
·Upper and reduced generate mechanism for length adjustment.
·Allows a excellent understack or overstack stream of containers.
·Equipped with automated belt stress-changing technique.
·Continuous and automatic box selection system that makes certain a neat transfer to the Press part, guaranteeing an aligned flow.

8.Push Section
·Independently motorized pneumatic push section.
·Upper area moves again and forward by way of a motorized program, allowing distinct box size.
·Pneumatic pressure regulation.

nine.Back-folding unit

·Motorized and untimed electronic back folding system with intelligent servo-motor technological innovation.
·Two independent servo motors, 1 for each shaft.
·Versatile and straightforward to setup.

Gluing method
1. Principal technological parameter:
Model                                                HZ4

Enter voltage AC220V (±20%)fifty-60HZ  
Electricity 480W
Glue-like precision ±1mm
Gel-stage 4 varieties
Design HB6
Guns three
To adhesives max viscosity 3000mPas
Each two-way transportation effectiveness 6:1
Gasoline supply enter specifications two-8bar
Weight 25kg
Measurement 1280*480*600mm

Plasma Surface Remedy
Principal technological parameter:

Model Cleanse-PL-5571  
Enter voltage AC220V
Nominal electrical power 1500AV
Plasma power offer frequency twenty-30khz
Air offer stress 60L/m³
Dimension 720*970*1270
Outlet angle <20mm
  2 guns
Fat 95kg



Automatic Carsh Lock Bottom 4 6 Corner Box Pasting Machine