Material Managing Energy UNIT

Materials Managing Electrical power UNIT one
General Description
This energy unit is made to the fork lift field, consisting of extremely efficient gear pump, DC motor, guide increase and reduce valve, tank, ect. The up and down motion are managed by the lever of your manual release valve, which can be equipped with an electric switch to activate the motor. The lowing pace is controlled by the stress compensated movement manage valve.
Unique Notes
one. The duty of this energy unit is S3, i.e. 30 seconds on and 270 senconds off.
2. Clean every one of the hydraulic components concerned in advance of set up of the energy unit.
3. Viscosity with the hydraulic oil shoud be 15~46 cst, which need to also be clean and free of charge of impurities, N46 hydraulic oil is advisable .
four. Oil modifying is required following the initial a hundred operation hrs, afterwards once every single 3000 hours.
five. The power unit shown is intended to be mounted horizontally.

Materials Handling Energy UNIT two
General Description
This electrical power unit characteristics power up gravity down circuit. Activate the start off solenoid to begin the motor to lift the machine. The lowing movement is activated through the solenoid valve with the decreasing velocity controlled through the pressure compensated movement manage valve. Goods of this series is often widely utilized in the market of logistic gadgets for example fork lift, mini lift table, and so forth.
Unique Notes
one. The duty of this energy unit is S3,i.e.,thirty seconds on and 270 senconds off.
two. Clean the many hydraulic components concerned just before mounting the power unit.
three. Viscosity on the hydraulic oil shoud be 15~46 cst,which really should also be clean and cost-free of impurities, N46 hydraulic oil is suggested .
4. Oil altering is required right after the original 100 operation hours,afterwards after just about every 3000 hrs.
5. The energy unit needs to be mounted horizontally.

Tags: