1050-Straight line Folding Gluing Equipment

      
Traits:
one.Driving by synchronous belt,ensure clean and accurate working.
2.Inverter driving,steady and electrical power preserving.
three.Use electric change,straightforward operate.
four.JCPTmatic ongoing feeding,use several belt with vibrating motor,(for greater configuration use drilled suction belt),to maintain the feeding steady.
five.JCPTmatic counting and kicking,amount can preset.
6.Conveyer force adjustable in accordance to the box to ensure very best good quality.
2. Main complex parameter:

Product	ZH-M1050-S
Suited substance	Card board210-850gsm , B/C/E/F flute corrugated board
Max technique	JCPTmatic constant feeding
Max mechanical velocity	300m/min
General dimension	15000*1900*1650mm
Bodyweight	8.6T
Electrical power intake	14KW,380V,50HZ
Compressed air	six bar,10 m³/h,sixty L

 Machine configuration

Principal motor	GPG
PLC	Siemens
Inverter	Siemens
Touch monitor	Siemens
Driving JCPT	NSK
Basic belt	NITTA Japan
Minimal voltage equipment	Schneider( Relays, contactor,breaker,Button)
Air cylinder	AIR TAC ZheJiang
Image Switch	Panasonic
Wall thickness	20m (appropriate facet,left side) tempered
Gluing method	KQ CHINA
Servo motor	Delta (ZheJiang ) for again fold

five.Characteristic:

one.Feeder Part

· Friction feeder. Independently driven by inverter.
   Adjustable digital pile vibrator.
· Lateral feed gates entirely adjustable to the width of the blank.

two.Paper Alignment Method:   
Independent section that registers the blank to a single aspect making certain a best parallelism ahead of getting into the pre-folding or gluing sections.
   Independently pushed by motor.
   Possibility to sign-up on any facet of the device.
   Fast and effortless setup.Configuration reducer, distinct bins when the conversion, the reducer with electric regulation

 

3.Pre-fold Section: (option)

   The pre-fold part has the benefit to make the box far more simple and easy to open,even in some circumstance the scoring is not extremely properly.
   Left hand glue flap pre-folder up to 180º.
   3rd crease pre-folding set up to 135º.
   1st and 3rd crease openers.
   Configuration reducer, different containers when the conversion, the reducer with electric regulation

4.Base Lock Section (selection )
   Lock-bottom assembly system with large elastic hookers is of deal layout,quickly and straightforward operation.
 ·Independently driven by motor.
   Complete set of folding hooks and helixes for smooth and correct folding of entrance flaps
   Adjustable hook stress.
   Fast and easy setup
   Configuration reducer, diverse bins when the conversion, the reducer with electric regulation.

five.Down Gluing part
 ·Two reduce (still left and appropriate) gluing tanks.
 ·Easy to eliminate and clear.
 

six.Folding Section

   Independently pushed by motor.
   JCPT and correct folding of 2nd and 4th creases.
   Outer folding belts adjustable up to 180º with variable speed controlled by inverter
   Easy accessibility.
 

7.Trombone  Section

· Independently pushed by motor.
· Upper and reduced drive mechanism for size adjustment.
 ·Allows a ideal understack or overstack stream of containers.
 ·Equipped with automatic belt rigidity-altering system.
 ·Continuous and computerized box assortment mechanism that ensures a neat transfer to the Push section, guaranteeing an aligned flow.

eight.Push Part
 ·Independently motorized pneumatic push area.
· Upper section moves back again and ahead through a motorized technique, allowing various box length.
· Pneumatic pressure regulation.

9.Back-folding system(option)

 ·Motorized and untimed electronic again folding technique with smart servo-motor technologies.
 ·Two unbiased servo motors, one for every shaft.
 ·Versatile and straightforward to set up.

Gluing method
one. Principal complex parameter:
Product HZ4

Input voltage	AC220V (±20%)fifty-60HZ
Electricity	480W
Glue-like precision	±1mm
Gel-stage	four sorts
Model	HB6
Guns	three
To adhesives max viscosity	3000mPas
Every single two-way transportation effectiveness	6:one
Fuel resource enter demands	2-8bar
Excess weight	25kg
Size	1280*480*600mm

Plasma Floor Treatment method
Principal technological parameter:

Design	Thoroughly clean-PL-5571
Enter voltage	AC220V
Nominal energy	1500AV
Plasma electrical power provide frequency	twenty-30khz
Air supply strain	60L/m³
Dimension	720*970*1270
Outlet angle	<20mm
	2 guns
Weight	95kg