General Description
This energy unit functions a long term magnet motor by using a electrical power up gravity down circuit. Activate the commence solenoid to begin the motor to lift the machine. The lowing movement is activated through the solenoid valve using the decreasing speed controlled through the pressure compensated flow control valve. Merchandise of this series could be extensively used in the sector of logistic units this kind of as fork lift, mini lift table, and so on.
Distinctive Notes
one. This electrical power unit is of S3 duty cycle, i.e.,non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean each of the hydraulic parts concerned in advance of installation of the power unit.
3. Viscosity with the hydraulic oil shoud be 15~46 cst, which should also be clean and free of charge of impurities. N46 hydraulic oil is encouraged.
4. This power unit is built to be mounted vertically.
5. Check the oil degree while in the tank soon after the primary star in the power unit.
6. Oil changing is required following the first one hundred operation hrs,afterwards when every 3000 hours.
7. More pump sizes and tank sizes are avaiable on request.