This utility design Increase the integrity of the digital lock by boosting the stage of the production procedure, making sure precision, and simplifying the method.
This utility design can make all the mortise lock upgrade to an electronic door lock by merely replacing the cylinder, The lock manner contain password, distant management, fingerprint.
No external energy offer, does not need an additional gap.

Complex qualifications
With the constant improvement of locks, various varieties of electronic lock have been continually developed and manufacturd, specially those consisted by wireless distant handle, password, fingerprint identification and unexpected emergency open up layout. But considering that we would built-in electronic, mechanical technological innovation into the lock method, making its inside framework far more complex, different styles and dimensions of various companies, made a lot of problems when we utilizing and changing.

1.Fingerprint
Touch keyboard to start the lock
Contact your enrolled finger to the fingerprint sensor.
Identification comprehensive, the door open up

two.Swipe card
By swiping card to unlock, supports up to 100.
Place the card on the lock identification reader at a standstill for a couple of seconds to comprehensive the identification.

3.Distant management
Consumer press the open button  on the distant handle inside of 3 meters away from the doorway, the doorway open.

4.Password
The touchpad could be the password keypad(-9 * #)to unlock.
push”*”to enter the password input interface.
Enter the password,push”#”to comfirm.
Soon after getting into the appropriate password,
the doorway open up.

Using conical information drive the bolt to open up the symmetrical bolt, bolt spring compressing to reset the symmetrical bolt. Environment the finding T-slot in the lock lever adapt to the door much more than 60 toes thick, could hold the symmetrical bolt flexible, power region dependable, reset safe, thus integrating digital, mechanical technology. At the very same time, optimize the composition, elevating the level of the manufacturing procedure, ensured the standardization of factors, Greatly boost the performance of assembly.