Sier-Bath Steady Sleeve and Flanged Sleeve Couplings

Constant Sleeve Series
Options
Straightforward and inexpensive all steel type of gear coupling constructed which has a single sleeve and 2 hubs
Comparatively easy set up
Precision cut 20° stress angle gear teeth with minimal backlash
Most common configurations can be found as stock goods
Angular misalignment of 1/2° per gear mesh (flex-plane)
Sizes 7/8 via twelve, to accommodate bore sizes as much as and which include 12.50 inches
Interference match (normal) and Clearance match on bores are available
Load Capacities vary from two,500 in-lbs as much as two,520,000 in-lbs
Designs for applications requiring horizontal and vertical orientation, full-flex, flex-rigid, mill-motor, disengagement, sliding hubs, Shear Pin, floating shaft, and spacers
Patented and tested BUNA N seal style with reinforced washers bonded towards the inside edges which positively retain lubricant and seal the interior from outside contaminants
Reinforced rubber seals with snap rings to hold in lubricant
Two snap rings made of hardened spring steel which securely hold the coupling together, are uncomplicated to put in or take out, however withstand one hundred,000 pounds of finish thrust
Inch and Metric bore sizes available
Flanged Sleeve Series
Options
Patented tooth type for long coupling lifestyle
Precision lower 20° pressure angle gear teeth with minimum backlash
All steel sleeves and hubs (stainless steel offered)
Types for applications requiring horizontal and vertical orientation
Most regular configurations are available as stock items
Angular misalignment of 1-1/2° per gear mesh (flex-plane) as much as size five.five, 3/4° for sizes 6 and above
Coupling sizes obtainable through size thirty to accommodate bore sizes up to and which includes 44 inches
Interference fit (common) and Clearance match on bores are available
Load capacities range from seven,600 in-lbs as much as 47,269,000 in-lbs
Exposed bolts typical on all sizes, shrouded out there by request up to dimension six
Typical bolts provided are treated to be corrosion resistant
Flanged sleeve couplings are interchangeable with marketplace specifications
Piloted gear fit for increased speeds and significantly less vibration
Labyrinth all steel seal design in FL series
Inch and Metric bore sizes out there
Common Forms and Sizes
Sier-Bath couplings are stocked in an assortment of configurations which include things like C and F common hubs and sleeves, Mill Motor hubs, Vertical type, Floating Shaft, and Spacer styles. ’s excellent engineering employees make it possible to support numerous added coupling forms this kind of because the Brakedrum type, Sliding Hub sort, Shear Pin kind, Jordan style, and customized lengths for non common shaft separations. Supplemental dimension ranges and types to meet uncommon application necessities may also be produced by to meet market demands. Material can vary from conventional steel to alloy steel and even stainless steel. The excellent simplicity of the coupling layout make this all possible.
Misalignment and End-Float Capability
The fundamental principle of Sier-Bath C and F style couplings is much like that of other traditional versatile gear couplings. Though it truly is desirable to align shafts as accurately as possible, the function of any versatile coupling is to absorb probable angular, parallel, and axial (end-float) misalignment. Sier-Bath couplings utilize a exclusive gear tooth geometry formulated exclusively to resolve issues with shaft misalignment and accommodate from 1/2° to 1-1/2° per gear mesh or flex plane. The hub teeth are totally crowned to supply to get a larger contact spot and decrease stresses below misaligned situations. The crowned tooth style also eliminates the vast majority of the finish loading that takes place on straight gear teeth beneath misalignment.

Tags: