SNOW PLOW Electrical power UNIT

Standard Description
Consisting of a pressure balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this power unit is designed to operate materials managing products. The reducing motion is achived from the solenoid valve together with the lowering speed managed by an adjustable needle valve. The left and proper functions are outfitted by using a dual pilot operated verify valve and cross-over relief valves.
Remark: Please talk to our income engineer for your distinctive pump displacement, motor electrical power or tank capacity.
Unique Notes
one. This power unit is of S3 duty cycle, i.e.,non-continuous operation,thirty seconds on and 270 seconds off.
two. Clean all the hydraulic components concerned just before installation of the energy unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst, which should really also be clean and free of charge of impurities.N46 hydraulic oil is proposed.
4. This electrical power unit ought to be mounted horizontal.
five. Check the oil level in the tank following the initial commence on the electrical power unit.
6. Oil altering is required soon after the initial a hundred operation hours, afterwards when every 3000 hours.