Ever-power Taper-Lock pulleys are flangeless for clean, small application. They are designed with an 8° taper and a flush-installed design with no protruding parts providing secure locking and elimination of wobble. In addition, Dodge Taper-Lock® bushings can be found with an optional Diamond D® integral key in popular sizes for a far more precise fit.
Stock sizes obtainable up to 12” shaft diameter
Worldwide acceptance and availability inch and metric bores
Flush Mounting-No Protruding Parts
Easy On/Easy Off design
Materials obtainable in sintered steel, cast iron, ductile iron, steel and stainless steel
modifications & accessories
Re-borable bushings designed for special bores or important seats, spline broaching.
Aggregate & Cement
Chemical, Oil, & Gas
Food, Beverage, & Pharmaceutical
Paper & Forest
Unit & Baggage Handling
Water & Wastewater
Any application that requires mounting of something on a shaft
Bushings are essential elements to attach Dodge mechanical drive elements:
roller chain drives
Fits SPA section V Belt
The Taper-Lock pulley size is defiined by 4 digits representing two numbers. The initial two digits represent the utmost bore size and the second two digits represent the bushing size. For instance, product number 1008 has a max bore of just one 1.0" and a total amount of 0.8"
" bore sizes are designated with the complete inch accompanied by the fraction. For instance a 1.5" diameter bore would be 1-1/2. Metric bore sizes are designated with "MM" following the metric dimension (X 25MM). These bushings are easy to install and remove, these bushings match flush into tapered bushing sprockets and or pulleys. The bushing contacts and wedges inward, gripping the shaft and bore of the sprocket. Bushings possess an 8° taper, are made from steel and have a black oxide coating.
Pitch Diameter: 75mm
Outdoors Diameter: 80.5mm
No of Rows: 2
Bush Size: 1108
Maximum Bore Size: 28mm / 1.1/8
Material: Cast Iron