Ever-power Taper-Lock pulleys are flangeless for clean, small application. They are manufactured with an 8° taper and a flush-mounted design with no protruding parts providing secure locking and elimination of wobble. Furthermore, Dodge Taper-Lock® bushings can be found with an optional Gemstone D® integral type in well-known sizes for a far more precise fit.
Stock sizes obtainable up to 12” shaft diameter
Globally acceptance and availability inch and metric bores
Flush Mounting-No Protruding Parts
Easy On/Easy Off design
Materials available in sintered metal, cast iron, ductile iron, steel and stainless steel
modifications & accessories
Re-borable bushings designed for special bores or essential seats, spline broaching.
Aggregate & Cement
Chemical, Oil, & Gas
Food, Beverage, & Pharmaceutical
Paper & Forest
Unit & Baggage Handling
Water & Wastewater
Any application that will require mounting of something on a shaft
Bushings are essential elements to install Dodge mechanical drive components:
roller chain drives
Fits SPA section V Belt
The Taper-Lock pulley size is defiined by 4 digits representing two numbers. The initial two digits represent the maximum bore size and the second two digits represent the bushing size. For instance, product number 1008 has a max bore of 1 1.0" and a complete amount of 0.8"
In . bore sizes are specified with the complete inch followed by the fraction. For instance a 1.5" diameter bore would be 1-1/2. Metric bore sizes are specified with "MM" after the metric dimension (X 25MM). These bushings are simple to install and remove, these bushings fit flush into tapered bushing sprockets and or pulleys. The bushing contacts and wedges inward, gripping the shaft and bore of the sprocket. Bushings have an 8° taper, are made of steel and have a black oxide coating.
Pitch Diameter: 75mm
Outside Diameter: 80.5mm
No of Rows: 2
Bush Size: 1108
Maximum Bore Size: 28mm / 1.1/8
Material: Cast Iron