The way to connect O-ring Chains Remarks to connect standard O-ring Chains

1.A connecting hyperlink of an O-ring Chain for standard application is pre-coated with grease at the pins. Ahead of connection, confirm the grease about the surfaces of pins, and if the volume of grease is modest, apply grease with bare hands. (If gloves are utilised, the grease will probably be absorbed from the gloves.)
Illustration: Once the connecting hyperlink (I) of an O-ring chain for general application is
shipped, O-rings are fitted in the roots in the pins. In the event the O-rings come loose as a result of vibration all through transport, refit the O-rings in to the roots from the pins.
In this instance, be sure to return the grease collected at the roots from the pins towards the central surfaces in the pins, much more at portion A than at portions B proven in the over illustration. (Portions A is worn on account of sliding using the bushings.)
2.The chain is often most effortlessly connected about the teeth of the sprocket. Engage the links at each ends of your chain together with the sprocket teeth and fit connecting pins. In case the sprocket is usually moved, the chain can also be linked within the loosened side.
three. Connecting procedure
one.Confirm that O-rings are attached towards the roots with the pins.
2.If your quantity of grease utilized to the connecting pins is smaller, coat the pins with grease with the central portions.
3.Insert the connecting pins in to the bushings with the inner backlinks at the two ends.
4.Confirm the grease is utilized for the complete encounter of the O-ring, and match the O-ring onto the connecting pins.
five.Insert the connecting pins in to the connecting plate and although pressing the connecting plate, install the spring clip. Verify whether or not the head (the end with no split) of your spring clip is turned inside the feeding path on the chain. (See the following illustration.)
six.Make sure you verify that the spring clip is securely fitted during the clip grooves of your connecting pins.
This completes jointing on the connecting hyperlink. Note that grease to the surfaces of connecting pins and O-rings might be removed for the duration of set up operate. In this instance, re-grease utilizing the grease around the surface with the base chain or even the grease within the polyethylene bag through which the connecting link was contained.