worm motor

Worm drive gearbox with motor
A robust worm-drive gearbox powered by an MM28 electric motor. Ideal applications where an easy to match, high torque result is required. Ideal for student based projects including robots and buggies.
The machine has been designed to ensure that the output shaft could be 'clicked' in and out for modification. E.g. reducing to size. The motor is snap fitted into its cradle to activate the gear and worm.
Details
1 - 6V DC
0.1A to 1A based on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
Overall dimensions of box + engine: 35(W) x 40(H) x 60(L)mm
The primary feature of this high-efficiency gear box is a worm gear, which locks the output shaft whenever the engine isn't turning. The high equipment ratios of 216:1 or 336:1 make this gearbox appropriate for little walking robots, lifting mechanisms, and various other applications where high torque is usually desired.
The low-voltage motors in the worm gearbox run on 1.5-4.5 volts and draw up to a few amps, making them ideal applicants for the DRV8833 motor driver carrier. Motor overheating can be caused by excessive stalling, even at suprisingly low voltages. We advise that you use stall-detection sensors, or just view your robot, to make sure that it doesn’t stall for more than a few seconds at the same time.
This gearbox has a 4 mm diameter, round output shaft, which works together with the wheels that are compatible with Tamiya 4 mm, round shafts. Our 3 mm universal mounting hub also fits on the smaller threaded end of the shaft, though it is not particularly designed to work with this type of shaft (the hub’s set screw could harm the thread on the shaft).
Ever-Power equipment motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical right angle worm geared motors set new criteria for reliability, effectiveness and economic climate with unparalleled features which includes hollow shafts in the smallest sizes. An inverter friendly style offers easy integration right now and a really future proof solution. The Ever-Power gear motor offers total flexibility in mounting choices includes shaft, base, face, and flange solutions. The engine terminal box could be mounted in alternative positions rotated in 90º steps around the motor frame offering for unparalleled integration possibilities.
Ever-Power gear motors comply with North American and International specifications, including NEMA, IEC, CSA, and CE, the Ever-Power series permits worldwide acceptance, a true total alternative for our global customers.
Excellent protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dust tight and hose proof,and can be used outdoors or in wet and dusty environments without the utilization of additional enclosures. Full rated output is offered by the result shaft of the unit.
Product Features
Power rating up to 5,5 kW.
Torque 25 ... 1.000 Nm
Output Speeds 0,2 ... 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
worm motor lubrication change 1st after 15000 hrs
Low noise gearing
Mains connection 110 ... 690V, 50/60Hz
Enclosure IP65 (Standard), IP66 (Optional)
Additional features:
Connecting with Connect connectors.
With built-in inverter up to 7,5kW.
Ever-Power-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-I, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm equipment motors are the alternative for applications requiring a part turn, optional dual output, or an inability for the motor to be back driven. The DC right angle gear motors are made for continuous and intermittent duty operation. Our right angle equipment reducers are designed with several mounting plate options, making them ideal for a variety of DC motor based applications. We offer 12 ratios ranging from 5:1 to 100:1.
10309
FEATURES
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 - 475 RPM
1.5 - 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 - 100:1 standard ratios
Regular brush life of 2000+ hours (varies by application)
EP Products Worm Equipment Motors are designed to generate high torque in a small package size. Worm Gear Motors are great for applications that require a self- locking or breaking feature because the output shaft can’t rotate when there’s no power applied. Additionally, Worm Gearheads can transfer movement in 90 degrees. With various decrease ratios, precision cut gears, voltages and sizes, EP Products includes a DC Worm Equipment Motor solution for your application.
Features and Benefits
HIGH Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Ability to Handle Large Gear Decrease Ratios
High Durability
Low Noise
Flexible Configuration
Applications
Security Door Locks / Industrial Conveying Systems / Security Gates / Dental care Chairs / Ambulance Cots & Stretchers Many of our DC Motors can be complimented with one of our Worm Gearheads. EP Products will continue to work with you to design and produce a Worm Gear Electric motor which will optimize the functionality of your specific application.
Built to your specific requirements
Electric motor Type: Brushed / Brushless / Coreless
Voltage
Output Speed
Power
Current
Torque
Reduction Ratio
Shaft Material & Size
Gear Material
Shaft Configuration: (D Cut / Round / Splined / Other)
General Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Extra Assembly Requirements (lead wires, connectors, etc.)
INTRODUCTION
The turbo metal gear worm engine runs on the metal gear box for toughness and a higher torque output. Due to the special mechanical framework of the worm drive the electric motor output shaft is self locking and will not be rotated.
This part runs on the two wire connection and supports direction control and also PWM speed control. Rated voltage is 12v and will attain 40RPM, with a torque of 8kg/cm.
SPECIFICATION
Operating Voltage: 6 - 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Rated Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing - Modual & Customizable drive technology
Worm gear units from EP DRIVESYSTEMS especially show their power in applications where high gear ratios are necessary. Our worm geared motors are consequently optimally suited for use in intralogistics, packaging technology and the food & beverage industry.
Four great reasons for EP worm geared motors:
Rugged
Our worm geared motors have a higher overload capacity
Maintenance Friendly
Washdown versions enable simple and effective cleaning of the drive program.
Corrosion protection
The NSD tupH sealed surface area conversion is exceptionally chemical, corrosion and abrasion resistant.
Flexibility
Our modular style give users optimum freedom.
The modular system for maximum flexibility: Our EP worm gear units
There are many applications that want drive systems, and each one of these has its unique requirements. The EP series worm gear motors can be quickly and effectively adapted to satisfy your needs.
Worm gear models impress with their high power density and compact design. If required, we can also supply them with the highly effective nsd tupH surface treatment.
As well as the basic EP casing, we offer an extensive line of bolt-on elements to customize the merchandise including torque arms, shaft covers and output flanges. These can be very easily field set up, but we will also be glad to assemble the individual components for you.
Find out more about the modular SI worm geared motors!
Find out more
Smooth and Clean: The EP worm gear unit SMI
SMI worm gear models feature a clean, corrosion-resistant alluminum alloy housing. Optional nsd tupH surface area conversion makes this product ideally suited for severe and challenging industries like food processing and pharmaceuticals.
Flexible input designs such as for example NEMA, IEC or immediate motor mounts in extra foot or flange mounted casing designs.
Worm geared motors
Worm geared motors for little power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared electric motor program. The units possess on all sides different fixing possibilities and enable a simple assembling for the customer.
Additional drive configurationscan be designed by use of built-on components (e.g. torque arm and result flanges). The housings are created in light weight building out of aluminium die cast. Motor attachment is realised in general by means of IEC adapter B5 or B14A.
Technical Data
Number of sizes:5
Power Range:0.12 - 2.2kW
Output torque range:17 - 230Nm
Ratio:5 - 100
Output option:result shaft, result shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/installation:uniblock, flange, torque arm
Buy Worm Drive Gearbox with Engine - incorporating the next features: 1 to 6V voltage ranking, 17100 rpm no load acceleration, 220g-cm stall torque, 3mm shaft diameter, 60mm long, 35mm wide, 40mm high, a robust worm drive gearbox powered by an MM28 electric motor (included), most ideal for applications where an easy to match, high torque output is required, nylon housing and equipment, requires light oil or silicon grease lubrication, well suited for student based projects including robots and buggies.
Most ideal for applications where an easy to match, high torque result is required
Perfect for student based projects including robots and buggies
Reversible High torque Turbo Worm Gear Electric motor JGY370 DC 12V 40RPM
Reversible High torque Turbo Worm Gear Engine JGY370 DC 12V 40RPM
Features:
The electric motor is Gear DC motor with micro-turbine worm, you can change the wiring-connection to change motor rotation.
Turbo worm geared motor with self-lock, that's, regarding motor without electric, the output axis is fixed, self-lock.
The reducer output shaft arranged vertically with the motor shaft, whole electric motor output shaft relatively-short than general gear engine, widely used to be installed the dimensions requirements strictly occasion.
Specifications:
Model: JGY370
Voltage: DC12V
No load speed: 40r/min
Output torque: 5.6kg.cm
Rated current: 0.06A
Weight: 163g
Application: open the screen, door, Mini winch. Ect.
In sumo robot or combat robot competition where high holding torque's motor is essential to avoid your robot being pushed by your opponent robot. The worm equipment is definitely a better option when compared to spur gear motor. Why is worm gear so special? Check this wiki out: Worm Drive.
"Unlike with ordinary gear trains, the path of transmission (insight shaft vs result shaft) is not reversible when working with large reduction ratios, because of the greater friction involved between the worm and worm-wheel, when usually a single start (a single spiral) worm is used. This is often a advantage when it's desired to eliminate any likelihood of the result driving the input."
In other terms, it is tough to push your load (example, your robot) if the motor is not power or rotate.
Features and Spec:
Metal gear box
Output shaft is self-locking due to the worm gear's characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Weight: 150g

Tags: