Zh-1050PC Corrugate Crash Lock Box Folder Gluer with High Quality

Zh-1050PC Corrugate Crash Lock Box Folder Gluer with High Quality

1050-Straight line Folding Gluing Machine

one.Driving by synchronous belt,guarantee clean and exact working.
2.Inverter driving,stable and power preserving.
3.Use electrical adjust,simple work.
four.JCPTmatic constant feeding,use a number of belt with vibrating motor,(for increased configuration use drilled suction belt),to hold the feeding steady.
5.JCPTmatic counting and kicking,quantity can preset.
6.Conveyer strain adjustable in accordance to the box to ensure ideal top quality.
2. Principal technical parameter:

Design ZH-M1050-S
Appropriate content Card board210-850gsm , B/C/E/F flute corrugated board
Max technique JCPTmatic ongoing feeding
Max mechanical pace 300m/min
All round dimension 15000*1900*1650mm
Bodyweight 8.6T
Electricity usage 14KW,380V,50HZ
Compressed air six bar,10 m³/h,sixty L

 Equipment configuration

Major motor GPG
PLC Siemens
Inverter Siemens
Touch display screen Siemens
Driving JCPT  NSK
Simple belt NITTA Japan
Low voltage apparatus Schneider( Relays, contactor,breaker,Button)
Air cylinder AIR TAC ZheJiang
Photo Switch Panasonic
Wall thickness 20m (appropriate facet,still left aspect) tempered
Gluing system KQ CHINA
Servo motor Delta (ZheJiang ) for again fold


1.Feeder Segment

· Friction feeder. Independently pushed by inverter.
   Adjustable electronic pile vibrator.
· Lateral feed gates totally adjustable to the width of the blank.

2.Paper Alignment Program:   
Unbiased part that registers the blank to one facet making certain a perfect parallelism prior to moving into the pre-folding or gluing sections.
   Independently driven by motor.
   Possibility to register on any side of the equipment.
   Fast and simple setup.Configuration reducer, different packing containers when the conversion, the reducer with electric powered regulation


three.Pre-fold Segment: (option)

   The pre-fold segment has the edge to make the box a lot more basic and easy to open,even in some case the scoring is not very well.
   Left hand glue flap pre-folder up to 180º.
   3rd crease pre-folding set up to 135º.
   1st and 3rd crease openers.
   Configuration reducer, diverse packing containers when the conversion, the reducer with electrical regulation

four.Base Lock Section (selection )
   Lock-bottom assembly mechanism with higher elastic hookers is of offer design and style,quickly and simple procedure.
 ·Independently driven by motor.
   Complete established of folding hooks and helixes for sleek and exact folding of front flaps
   Adjustable hook pressure.
   Fast and easy set up
   Configuration reducer, different boxes when the conversion, the reducer with electric powered regulation.

5.Down Gluing section
 ·Two lower (left and correct) gluing tanks.
 ·Easy to get rid of and thoroughly clean.

6.Folding Section

   Independently driven by motor.
   JCPT and accurate folding of 2nd and 4th creases.
   Outer folding belts adjustable up to 180º with variable velocity managed by inverter
   Easy accessibility.

7.Trombone  Section

· Independently pushed by motor.
· Upper and lower travel mechanism for size adjustment.
 ·Allows a ideal understack or overstack stream of containers.
 ·Equipped with computerized belt tension-changing method.
 ·Continuous and automated box selection system that makes certain a neat transfer to the Press area, guaranteeing an aligned stream.

eight.Push Part
 ·Independently motorized pneumatic press segment.
· Upper area moves again and ahead by means of a motorized technique, allowing diverse box length.
· Pneumatic force regulation.

9.Back again-folding gadget(option)

 ·Motorized and untimed electronic back folding technique with clever servo-motor technologies.
 ·Two independent servo motors, one for every single shaft.
 ·Versatile and straightforward to setup.

Gluing program
one. Primary technological parameter:
Design HZ4

Input voltage AC220V (±20%)50-60HZ  
Power 480W
Glue-like precision ±1mm
Gel-point 4 varieties
Design HB6
Guns three
To adhesives max viscosity 3000mPas
Every single two-way transport efficiency six:1
Gas source input requirements 2-8bar
Weight 25kg
Dimensions 1280*480*600mm

Plasma Surface Treatment
Primary technological parameter:

Model Clean-PL-5571  
Enter voltage AC220V
Nominal electricity 1500AV
Plasma energy source frequency 20-30khz
Air supply force 60L/m³
Dimension 720*970*1270
Outlet angle <20mm
  2 guns
Excess weight 95kg



Zh-1050PC Corrugate Crash Lock Box Folder Gluer with High Quality