780-lock base-double aspect-straight line  
Folding Gluing Device
      

Attributes:
1.Driving by synchronous belt,make sure smooth and precise running.
2.Inverter driving,steady and energy preserving.
three.Use electric change,simple run.
4.JCPTmatic constant feeding,use multiple belt with vibrating motor to maintain the feeding steady.
5.JCPTmatic counting and kicking,quantity can preset.
six.Conveyer pressure adjustable in accordance to the box to make certain best quality.

2. Main technical parameter:

Design	ZH-780-Personal computer
Suitable content	Card board 210-800gsm/E flute
Max approach	JCPTmatic constant feeding
Max mechanical speed	350m/min
Overall dimension	14000*1500*1400mm
Fat	5.5T
Electrical power intake	eleven.8KW, 380V, 50HZ
Compressed air	6 bar,10 m³/h,60 L

Device configuration

Primary motor	Siemens
Contact screen	Siemens
PLC	Siemens
Inverter	Siemens
Generate JCPT	NSK
Wall thickness	Double side 20mm tempered
Feeding belt	NITTA
Basic belt	NITTA Japan
Circuit Breaker	Schneider
Count	Schneider
Button	Schneider
Swap energy source	Schneider
Picture Swap	Panasonic

Characteristic:

1.Feeder Section
With impartial transmission,low noise,with entrance adjustable wheels,max operating capacity can be reached.
Feeding knives and remaining and right registers correcting bar are controlled up and down by pneumatic method easily.
Feeding knifes are geared up with pneumatic mechanism for smoother feeding.
Configure the display, true-time monitoring of the paper is typical.

two.Paper Alignment Method:  
JCPTmatic alignment technique to correct the paper feeding,avoiding the paper likely to sides.
Configure the transmission  to modify the belt velocity,Make the box much more neat.

three.Pre-fold Section:

The pre-fold section has the benefit to make the box far more plain and straightforward to open,even in some case the scoring is not very effectively.
• Left hand glue flap pre-folder up to 180º.
• third crease pre-folding set up to 135º.
• 1st and 3rd crease openers.
Configuration reducer, distinct bins when the conversion, the reducer with electric regulation

four.Bottom Lock Section

Huge-volume design and style,when the equipment is operating at large velocity,the glue will not go out or leaking .Optional
bottle is very good for lengthy time procedure.
Lock-base assembly system with higher elastic hookers is of offer design,quick and simple procedure.
Configuration reducer, distinct packing containers when the conversion, the reducer with electric powered regulation
 

5.Down gluing segment

Two aspect gluing tank.(appropriate and left)
Simple to get rid of and clean

six.Folding Section
Equipped with speed variator for belts,ensure the folded boxes parallel and in good order
Fast,convenient adjustment and operation can fold boxes perfectly
The middle up and down transmission module can fold boxes synchronously or alternately
Configuration reducer, diverse boxes when the conversion, the reducer with electric regulation.

seven.Trombone  Section
• Continuous and automated box assortment system that ensures a neat transfer to the Push segment,    guaranteeing a wellaligned stream.
Configure the Siemens touch screen computer pace can be altered

eight.Push section
• Guide and automatic pace variation in coordination with a photocell.

Gluing system
one. Primary technological parameter:
Product HZ4

Enter voltage	AC220V (±20%)fifty-60HZ
Electrical power	480W
Glue-like precision	±1mm
Gel-point	4 varieties
Design	HB6
Guns	3
To adhesives max viscosity	3000mPas
Each two-way transportation performance	6:1
Gas supply enter specifications	two-8bar
Bodyweight	25kg
Dimensions	1280*480*600mm

Plasma Surface area Treatment method
Primary technological parameter:

Product	Cleanse-PL-5571
Enter voltage	AC220V
Nominal electricity	1500AV
Plasma electrical power source frequency	20-30khz
Air source force	60L/m³
Dimension	720*970*1270
Outlet angle	<20mm
	2 guns
Excess weight	95kg