Zh-650ca Crash Lock Bottom Folding Gluing Sweet Box Making

Zh-650ca Crash Lock Bottom Folding Gluing Sweet Box Making

1050-Straight line Folding Gluing Machine

one.Driving by synchronous belt,make certain easy and precise managing.
two.Inverter driving,steady and electricity conserving.
three.Use electric adjust,effortless run.
four.JCPTmatic ongoing feeding,use multiple belt with vibrating motor,(for larger configuration use drilled suction belt),to hold the feeding stable.
five.JCPTmatic counting and kicking,amount can preset.
6.Conveyer strain adjustable in accordance to the box to ensure best top quality.
2. Primary technical parameter:

Design ZH-M1050-S
Suitable material Card board210-850gsm , B/C/E/F flute corrugated board
Max method JCPTmatic steady feeding
Max mechanical pace 300m/min
Total dimension 15000*1900*1650mm
Excess weight 8.6T
Energy consumption 14KW,380V,50HZ
Compressed air 6 bar,10 m³/h,sixty L

 Device configuration

Primary motor GPG
PLC Siemens
Inverter Siemens
Touch monitor Siemens
Driving JCPT  NSK
Plain belt NITTA Japan
Reduced voltage equipment Schneider( Relays, contactor,breaker,Button)
Air cylinder AIR TAC ZheJiang
Photo Swap Panasonic
Wall thickness 20m (right facet,still left aspect) tempered
Gluing system KQ CHINA
Servo motor Delta (ZheJiang ) for back fold


1.Feeder Section

· Friction feeder. Independently driven by inverter.
   Adjustable electronic pile vibrator.
· Lateral feed gates totally adjustable to the width of the blank.

two.Paper Alignment Program:   
Unbiased segment that registers the blank to one facet guaranteeing a best parallelism ahead of getting into the pre-folding or gluing sections.
   Independently driven by motor.
   Possibility to sign up on any aspect of the machine.
   Fast and straightforward set up.Configuration reducer, different bins when the conversion, the reducer with electric powered regulation


3.Pre-fold Part: (selection)

   The pre-fold segment has the benefit to make the box far more plain and effortless to open up,even in some case the scoring is not really nicely.
   Left hand glue flap pre-folder up to 180º.
   3rd crease pre-folding set up to 135º.
   1st and 3rd crease openers.
   Configuration reducer, distinct packing containers when the conversion, the reducer with electrical regulation

4.Bottom Lock Section (option )
   Lock-bottom assembly system with high elastic hookers is of offer layout,quickly and effortless operation.
 ·Independently pushed by motor.
   Complete set of folding hooks and helixes for easy and precise folding of entrance flaps
   Adjustable hook pressure.
   Fast and effortless setup
   Configuration reducer, various boxes when the conversion, the reducer with electrical regulation.

5.Down Gluing area
 ·Two reduce (still left and correct) gluing tanks.
 ·Easy to take away and clean.

6.Folding Section

   Independently driven by motor.
   JCPT and accurate folding of 2nd and 4th creases.
   Outer folding belts adjustable up to 180º with variable pace managed by inverter
   Easy accessibility.

seven.Trombone  Section

· Independently driven by motor.
· Upper and reduced push system for duration adjustment.
 ·Allows a excellent understack or overstack stream of containers.
 ·Equipped with computerized belt pressure-modifying method.
 ·Continuous and automated box assortment mechanism that assures a neat transfer to the Push part, guaranteeing an aligned circulation.

eight.Push Area
 ·Independently motorized pneumatic press area.
· Upper area moves again and forward via a motorized system, making it possible for various box size.
· Pneumatic pressure regulation.

nine.Back-folding device(selection)

 ·Motorized and untimed electronic back again folding system with intelligent servo-motor engineering.
 ·Two unbiased servo motors, 1 for every single shaft.
 ·Versatile and straightforward to set up.

Gluing program
1. Major specialized parameter:
Design HZ4

Input voltage AC220V (±20%)fifty-60HZ  
Electrical power 480W
Glue-like precision ±1mm
Gel-position 4 kinds
Design HB6
Guns 3
To adhesives max viscosity 3000mPas
Every two-way transportation performance six:1
Fuel resource enter specifications 2-8bar
Weight 25kg
Measurement 1280*480*600mm

Plasma Surface area Treatment method
Main complex parameter:

Design Clear-PL-5571  
Enter voltage AC220V
Nominal electrical power 1500AV
Plasma electrical power source frequency twenty-30khz
Air provide stress 60L/m³
Dimension 720*970*1270
Outlet angle <20mm
  2 guns
Fat 95kg



Zh-650ca Crash Lock Bottom Folding Gluing Sweet Box Making