1450-Straight line- double side-lock-bottom-4-6corner perform
Folding Gluing Machine
1.Driving by synchronous belt,make sure easy and accurate managing.
2.Inverter driving,stable and electricity preserving.
three.Use electrical adjust,effortless work.
four.JCPTmatic steady feeding,use several belt with vibrating motor,(for greater configuration use drilled suction belt),to keep the feeding secure.
five.JCPTmatic counting and kicking,quantity can preset.
six.Conveyer strain adjustable according to the box to make sure ideal good quality.
two. Principal specialized parameter:
|Suitable material||Card board210-850gsm , A/B/C/E/F flute corrugated board|
|Max technique||JCPTmatic ongoing feeding|
|Max mechanical speed||300m/min|
|Electricity consumption||21.five KW,380V,50HZ|
|Compressed air||6 bar,ten m³/h,60 L|
Common & Optional configuration list
|two||Paper Alignment Segment||√|
|four||Crash lock bottom area||√|
|5||Upper paste barrel products||√|
|6||Down pasting equipment||√|
|nine||Plasma treatment program|
|ten||Folding and closing section||√|
·Friction feeder. Independently pushed by inverter.
Adjustable electronic pile vibrator.
·Lateral feed gates fully adjustable to the width of the blank.
two.Paper Alignment Technique:
Independent area that registers the blank to a single aspect guaranteeing a perfect parallelism just before entering the pre-folding or gluing sections.
Independently driven by motor.
Possibility to register on any side of the device.
Fast and easy set up.Configuration reducer, different boxes when the conversion, the reducer with electric regulation
The pre-fold area has the edge to make the box a lot more basic and straightforward to open,even in some situation the scoring is not very properly.
Left hand glue flap pre-folder up to 180º.
3rd crease pre-folding set up to 135º.
1st and third crease openers.
Configuration reducer, diverse bins when the conversion, the reducer with electric powered regulation
4.Base Lock Section
Lock-bottom assembly system with high elastic hookers is of offer layout,quick and effortless procedure.
·Independently driven by motor.
Complete set of folding hooks and helixes for easy and precise folding of front flaps
Adjustable hook tension.
Fast and straightforward setup
Configuration reducer, distinct boxes when the conversion, the reducer with electric regulation.
5.Down Gluing part
·Two decrease (still left and correct) gluing tanks.
·Easy to eliminate and clean.
Independently driven by motor.
JCPT and precise folding of 2nd and 4th creases.
Outer folding belts adjustable up to 180º with variable velocity controlled by inverter
Configure the servo motor to change the belt velocity,Make the box a lot more neat
·Independently pushed by motor.
·Upper and lower travel system for size adjustment.
·Allows a excellent understack or overstack stream of packing containers.
·Equipped with automatic belt tension-changing technique.
·Continuous and computerized box assortment system that makes certain a neat transfer to the Press section, guaranteeing an aligned flow.
·Independently motorized pneumatic push part.
·Upper area moves back and ahead via a motorized method, permitting different box size.
·Pneumatic strain regulation.
1. Primary technical parameter:
|Input voltage||AC220V (±20%)fifty-60HZ|
|To adhesives max viscosity||3000mPas|
|Every two-way transportation effectiveness||six:one|
|Fuel source enter requirements||two-8bar|
Plasma Surface Remedy
Principal complex parameter:
|Plasma energy provide frequency||20-30khz|
|Air source stress||60L/m³|