1450-Straight line- double aspect-lock-bottom-four-6corner operate
Folding Gluing Machine
one.Driving by synchronous belt,guarantee sleek and exact running.
two.Inverter driving,stable and power saving.
3.Use electrical change,simple work.
4.JCPTmatic ongoing feeding,use multiple belt with vibrating motor,(for greater configuration use drilled suction belt),to keep the feeding stable.
five.JCPTmatic counting and kicking,quantity can preset.
six.Conveyer stress adjustable in accordance to the box to guarantee best high quality.
two. Main specialized parameter:
|Suited substance||Card board210-850gsm , A/B/C/E/F flute corrugated board|
|Max technique||JCPTmatic steady feeding|
|Max mechanical speed||300m/min|
|Energy intake||21.5 KW,380V,50HZ|
|Compressed air||6 bar,10 m³/h,60 L|
Common & Optional configuration list
|two||Paper Alignment Section||√|
|4||Crash lock base segment||√|
|five||Higher paste barrel tools||√|
|6||Down pasting equipment||√|
|nine||Plasma treatment program|
|ten||Folding and closing section||√|
·Friction feeder. Independently driven by inverter.
Adjustable electronic pile vibrator.
·Lateral feed gates entirely adjustable to the width of the blank.
2.Paper Alignment Technique:
Independent area that registers the blank to 1 side guaranteeing a perfect parallelism ahead of getting into the pre-folding or gluing sections.
Independently driven by motor.
Possibility to sign up on any facet of the equipment.
Fast and easy set up.Configuration reducer, different containers when the conversion, the reducer with electric powered regulation
The pre-fold section has the advantage to make the box much more plain and easy to open,even in some scenario the scoring is not quite effectively.
Left hand glue flap pre-folder up to 180º.
3rd crease pre-folding set up to 135º.
1st and third crease openers.
Configuration reducer, diverse boxes when the conversion, the reducer with electric powered regulation
4.Base Lock Section
Lock-bottom assembly mechanism with higher elastic hookers is of deal design,quick and easy operation.
·Independently driven by motor.
Complete established of folding hooks and helixes for clean and precise folding of entrance flaps
Adjustable hook pressure.
Fast and straightforward setup
Configuration reducer, distinct packing containers when the conversion, the reducer with electrical regulation.
5.Down Gluing section
·Two reduced (remaining and correct) gluing tanks.
·Easy to remove and thoroughly clean.
Independently driven by motor.
JCPT and correct folding of 2nd and 4th creases.
Outer folding belts adjustable up to 180º with variable speed managed by inverter
Configure the servo motor to change the belt velocity,Make the box far more neat
·Independently pushed by motor.
·Upper and reduced push mechanism for duration adjustment.
·Allows a perfect understack or overstack stream of packing containers.
·Equipped with automated belt stress-changing technique.
·Continuous and automatic box selection system that ensures a neat transfer to the Press section, guaranteeing an aligned movement.
·Independently motorized pneumatic press section.
·Upper segment moves again and ahead by way of a motorized technique, permitting distinct box length.
·Pneumatic strain regulation.
1. Primary technical parameter:
|Enter voltage||AC220V (±20%)50-60HZ|
|To adhesives max viscosity||3000mPas|
|Every single two-way transportation effectiveness||6:one|
|Gasoline source enter requirements||two-8bar|
Plasma Floor Therapy
Primary complex parameter:
|Plasma energy source frequency||20-30khz|
|Air supply pressure||60L/m³|