780-lock base-double aspect-straight line  
Folding Gluing Device
      

Traits:
one.Driving by synchronous belt,ensure sleek and accurate operating.
2.Inverter driving,steady and electricity saving.
three.Use electric alter,easy operate.
4.JCPTmatic constant feeding,use numerous belt with vibrating motor to maintain the feeding stable.
five.JCPTmatic counting and kicking,quantity can preset.
6.Conveyer pressure adjustable according to the box to guarantee very best quality.

2. Main specialized parameter:

Product	ZH-780-Computer
Suited content	Card board 210-800gsm/E flute
Max strategy	JCPTmatic steady feeding
Max mechanical pace	350m/min
General dimension	14000*1500*1400mm
Weight	5.5T
Energy consumption	eleven.8KW, 380V, 50HZ
Compressed air	six bar,ten m³/h,60 L

Equipment configuration

Principal motor	Siemens
Touch screen	Siemens
PLC	Siemens
Inverter	Siemens
Travel JCPT	NSK
Wall thickness	Double side 20mm tempered
Feeding belt	NITTA
Basic belt	NITTA Japan
Circuit Breaker	Schneider
Depend	Schneider
Button	Schneider
Change electrical power provide	Schneider
Picture Swap	Panasonic

Function:

one.Feeder Part
With impartial transmission,low noise,with entrance adjustable wheels,max functioning capacity can be reached.
Feeding knives and left and correct registers correcting bar are controlled up and down by pneumatic program easily.
Feeding knifes are geared up with pneumatic mechanism for smoother feeding.
Configure the display, genuine-time checking of the paper is typical.

2.Paper Alignment Program:  
JCPTmatic alignment program to proper the paper feeding,avoiding the paper going to sides.
Configure the transmission  to modify the belt pace,Make the box much more neat.

3.Pre-fold Segment:

The pre-fold section has the benefit to make the box a lot more plain and effortless to open,even in some case the scoring is not very properly.
• Still left hand glue flap pre-folder up to 180º.
• 3rd crease pre-folding set up to 135º.
• 1st and 3rd crease openers.
Configuration reducer, distinct bins when the conversion, the reducer with electric regulation

4.Bottom Lock Part

Huge-volume layout,when the machine is operating at higher velocity,the glue will not go out or leaking .Optional
bottle is very good for long time procedure.
Lock-base assembly mechanism with high elastic hookers is of deal style,rapidly and easy operation.
Configuration reducer, various bins when the conversion, the reducer with electrical regulation
 

5.Down gluing section

Two side gluing tank.(appropriate and remaining)
Straightforward to get rid of and cleanse

6.Folding Section
Equipped with speed variator for belts,ensure the folded boxes parallel and in good order
Quickly,convenient adjustment and operation can fold boxes perfectly
The middle up and down transmission module can fold boxes synchronously or alternately
Configuration reducer, distinct packing containers when the conversion, the reducer with electrical regulation.

seven.Trombone  Section
• Constant and computerized box assortment mechanism that makes certain a neat transfer to the Press area,    guaranteeing a wellaligned stream.
Configure the Siemens touch monitor personal computer pace can be adjusted

8.Push area
• Manual and automatic velocity variation in coordination with a photocell.

Gluing method
1. Principal technological parameter:
Design HZ4

Input voltage	AC220V (±20%)fifty-60HZ
Energy	480W
Glue-like precision	±1mm
Gel-point	4 sorts
Design	HB6
Guns	three
To adhesives max viscosity	3000mPas
Every single two-way transportation efficiency	six:one
Fuel resource enter requirements	two-8bar
Weight	25kg
Dimension	1280*480*600mm

Plasma Surface Treatment
Main complex parameter:

Product	Thoroughly clean-PL-5571
Enter voltage	AC220V
Nominal energy	1500AV
Plasma electricity offer frequency	twenty-30khz
Air source pressure	60L/m³
Dimension	720*970*1270
Outlet angle	<20mm
	2 guns
Excess weight	95kg