780-lock base-double facet-straight line  
Folding Gluing Equipment
      

Characteristics:
one.Driving by synchronous belt,ensure clean and exact operating.
2.Inverter driving,secure and electricity preserving.
three.Use electrical change,easy operate.
4.JCPTmatic continuous feeding,use several belt with vibrating motor to hold the feeding secure.
5.JCPTmatic counting and kicking,quantity can preset.
6.Conveyer pressure adjustable in accordance to the box to ensure very best quality.

two. Major technological parameter:

Model	ZH-780-Computer
Suited material	Card board 210-800gsm/E flute
Max approach	JCPTmatic steady feeding
Max mechanical pace	350m/min
Overall dimension	14000*1500*1400mm
Excess weight	5.5T
Electrical power usage	eleven.8KW, 380V, 50HZ
Compressed air	6 bar,ten m³/h,sixty L

Device configuration

Primary motor	Siemens
Touch monitor	Siemens
PLC	Siemens
Inverter	Siemens
Travel JCPT	NSK
Wall thickness	Double facet 20mm tempered
Feeding belt	NITTA
Simple belt	NITTA Japan
Circuit Breaker	Schneider
Depend	Schneider
Button	Schneider
Switch electrical power provide	Schneider
Picture Switch	Panasonic

Function:

1.Feeder Part
With unbiased transmission,minimal sound,with front adjustable wheels,max functioning ability can be accomplished.
Feeding knives and remaining and right registers repairing bar are controlled up and down by pneumatic system very easily.
Feeding knifes are geared up with pneumatic system for smoother feeding.
Configure the exhibit, actual-time checking of the paper is typical.

two.Paper Alignment Method:  
JCPTmatic alignment technique to right the paper feeding,avoiding the paper heading to sides.
Configure the transmission  to alter the belt speed,Make the box a lot more neat.

3.Pre-fold Segment:

The pre-fold section has the benefit to make the box far more simple and straightforward to open up,even in some case the scoring is not really well.
• Left hand glue flap pre-folder up to 180º.
• 3rd crease pre-folding established up to 135º.
• 1st and third crease openers.
Configuration reducer, diverse containers when the conversion, the reducer with electric powered regulation

four.Bottom Lock Segment

Large-volume layout,when the equipment is working at large speed,the glue will not go out or leaking .Optional
bottle is great for lengthy time procedure.
Lock-base assembly system with large elastic hookers is of offer layout,fast and effortless procedure.
Configuration reducer, distinct boxes when the conversion, the reducer with electric regulation
 

5.Down gluing area

Two facet gluing tank.(proper and still left)
Simple to take away and thoroughly clean

six.Folding Section
Equipped with speed variator for belts,ensure the folded boxes parallel and in good order
Fast,convenient adjustment and operation can fold boxes perfectly
The middle up and down transmission module can fold boxes synchronously or alternately
Configuration reducer, different packing containers when the conversion, the reducer with electric regulation.

seven.Trombone  Section
• Steady and computerized box assortment mechanism that assures a neat transfer to the Press area,    guaranteeing a wellaligned movement.
Configure the Siemens contact monitor computer velocity can be altered

8.Push segment
• Guide and automatic speed variation in coordination with a photocell.

Gluing method
1. Main technical parameter:
Product HZ4

Enter voltage	AC220V (±20%)50-60HZ
Power	480W
Glue-like precision	±1mm
Gel-level	4 sorts
Design	HB6
Guns	three
To adhesives max viscosity	3000mPas
Each and every two-way transportation performance	6:one
Gas resource input requirements	two-8bar
Excess weight	25kg
Size	1280*480*600mm

Plasma Floor Remedy
Major specialized parameter:

Model	Cleanse-PL-5571
Input voltage	AC220V
Nominal power	1500AV
Plasma electrical power source frequency	twenty-30khz
Air source strain	60L/m³
Dimension	720*970*1270
Outlet angle	<20mm
	2 guns
Fat	95kg