Fan Electric motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Description: New fan motor, removed from unused 18” or 24” China Air flow Compressor electric fan motor china diameter TPI fans. Made to operate an 18” or 24” enthusiast blade (blade NOT included).
This motor comes with a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All of the wiring between your electric electric motor, capacitor and quickness control switch is still installed however the cord itself is generally detached as observed in the photos. (Find “Control Notice” below for modify type.)
T (See “Application Notice” below for utilize in a variety of other applications.)
Measurements: The engine body is 5” diameter and 3 ½” long (excluding the shaft). The engine shaft is certainly½” (0.500″) diameter x 2 ½” lengthy with a collection screw clean. There are (4) threaded mounting lugs on leading of the motor, ½” long x .16 dia. with washers and nuts. The studs may actually have got 4mm threads and also to end up being on a 117mm (4.6”)diameter circle (3 ¼” measured in one stud to another).
Rate: The approximate motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Path of rotation (facing the shaft end of the electric motor) is Clockwise.
Control Take notice: Motors will come with The 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we have demonstrated BOTH variations in the images). Both of these types of switches both control the engine just as (but you have a rotating knob and you have got a pull-chain). In the event that you order several engine at a time, we can do our best to supply your purchase with each one sort of control or the additional.
Application Note: USUALLY DO NOT use this electric engine in a nonfan program. This is a totally enclosed fan electric electric motor and designed to have continuous ventilation over the motor casing for cooling. The casing isn’t vented and the electrical electric motor will overheat and get into automatic thermal overload if run in a nonfan system where there isn’t solid ventilation past the electric motor. (Caution Note: the electric motor will restart instantly when it cools cool off.) Using this electrical motor for applications aside from 18 & 24″ TPI fans could also overload the engine and lead it to proceed into automatic thermal overload. (Your companion blade from another producer may possess a steeper blade position.)
Origin: This electric motor is manufactured in China.