rotary cutter gearbox
rotary cutter gearbox
RC-twenty Collection
Specifications
Torque: 1,750 - three,267 lb.-in.
198 - 369 Nm.
Ratios: one:two.5, 1:two.eighty three
Seals: Triple Lip Spring Loaded
Bearings: Deep Groove Ball
Oil Cap: 16 oz. (.forty seven L)
Fat: 34 lbs. (fifteen.four kg)
Programs
Ending Mowers Rotary Cutters
Rotary Slashers Toppers
RC-27 
Sequence
RC-thirty Sequence
Specifications
Torque: 2,800 - 4,667 lb.-in.
316 - 527 Nm.
Ratios: one:1.47, 1:one.seventy one, 1:one.93
Seals: Triple Lip Spring Loaded
Bearings: Deep Groove Ball
Oil Cap: 23 oz. (.68 L)
Bodyweight: 51 lbs. (23.1 kg)
Purposes
Finishing Mowers Rotary Cutters
Rotary Slashers Toppers
RC-51 Collection
Requirements
Torque: 2,800 - four,667 lb.-in.
316 - 527 Nm.
Ratios: 1:1.forty seven, one:1.seventy one, one:one.ninety three
Seals: Triple Lip Spring Loaded
Bearings: Tapered Roller/ Deep Groove Ball
Oil Cap: 27 oz. (.80 L)
Fat: 56 lbs. (twenty five.4 kg)
Purposes
Rotary Cutters Rotary Slashers
Gears: Accessible with possibly straight bevel or spiral bevel gearing.
Electrical power: Hp & Torque dependent on AGMA system for ongoing duty furthermore a support or load course issue.
Shafting: Various dimensional, metallurgical, and heat-deal with possibilities offered.
Bearings: Geardrives obtainable with different bearing life choices.
Lubrication: Drives available with different lubes dependent on running qualities
Substitute Rotary Cutter gearbox, 40hp rated, one-3/8"-six spline input shaft, one.57" X twelve tapered spline output shaft and one:one.forty seven pace up ratio. These gearboxes have a sq. housing configuration and are equivalent in mounting and ratio to the round configuration gearboxes. These are first equipment gearboxes on the IM402, IM502 and IM602 series rotary cutters which featured slip clutch PTO shafts. This gearbox will not match the IM400, IM500 and IM60 versions as they have a clean input shaft! If your gearbox has a 12 spline output shaft and a 1-three/8" - 6 spline input shaft this gearbox will operate. Bolt pattern is 4-three/4" on centre gap to gap and six-three/four" heart to heart of bolt hole on diagonal. The mounting holes sort a sq. bolt sample.
rotary cutter gearbox
Discover everything you have actually ever wanted to recognize regarding rotary cutter gearbox.